Below is a list of the most popular questions from our customers. If you can’t find the answer to your question within our FAQ section, please write to us here > contactus@3dlightfx.com and we will get back to you within 3-5 business days.

Q: How long do the batteries last?
A: Depending on usage, most new batteries will last 2 to 3 weeks if the light is turned off during the day.

Q: What drill size do the screws use?
A: The screws provided use a 3/16th drill-bit size

Q: How much light do the Deco Night Lights give off?
A: Typically, the Deco Nightlights give of enough light for parents to view the infants without turning on additional lighting. They are bright enough so children can move about the room and take themselves in and out of their beds without turning on additional lighting.

Q: What other designs does 3DLightFX have?
A: In addition to our collection that ranges from Heroes to Villains Pups to Minions, Princesses to Ponies, we are always developing new and exciting lines! 

Q: Can the Decal Sticker be applied onto any wall surface?
A: The Decal Sticker can be applied to just about any clean, smooth, and weather-resistant surface that is free of dust, grease, or other contaminates. Decal Sticker may not adhere to textured surfaces. We strongly discourage installation of the Decal Sticker on certain surfaces such as brick, stucco, concrete block, suede paints, and sand paints.

Q: Can the Decal Sticker be installed on wallpaper?
A: Yes. Decal Sticker can be applied to certain types of wallpaper; however, wallpaper can vary widely in texture and quality. Also, the Decal Sticker may not release from certain wallpapers without causing damage.

Q: Will the Decal Sticker adhere to all paints?
A: The Decal Sticker installs easily on the most common types of home decorating paints, such as latex and oil-based. It will also work on other paints, although some highly textured paints or paints with additives can make application difficult.

Q: Can I apply the Decal Sticker to a newly painted wall?
A: Freshly painted walls should be allowed to cure for at least two weeks before you apply the Decal Sticker.

Q: Will the Decal Sticker damage my wall?
A: Most people have no wall damage when the Decal Sticker is removed. We recommend watching the “Sticker Removal” video on our instructions page before attempting to remove the sticker from your wall. Please be aware that, as with any decorative medium, there is potential for wall damage.

Q: I can’t get my Decal Sticker to transfer to my surface; what do you suggest?
A: Make sure the surface and the Decal Sticker are at room temperature. If a surface is too cold, gradually heat it to room temperature with a blow dryer on the low setting. 
NOTE: Use care to avoid overheating the sticker and/or wall to avoid damage.
Tip: Depending on the temperature outside, sometimes the finished surface on the inside of an exterior
wall can be colder than room temperature.

Q: How long will the Decal Sticker last after it has been applied to a surface?
A: The Decal Sticker is not intended for permanent application; however, it can last for years depending on the surface and environment. The high quality vinyl we use has been rated to last 3 years – and generally last much longer.

Q: Is it safe to install above a bed or crib?
A: We have included very specific instructions as to the proper way to install your 3D Deco Night Lights, you may view them on the Crack Sticker Installation video. If these instructions are followed properly, there should be no issues installing above a bed or over a crib.

Q: What is the warranty on the product?
A: 1 year manufacturer’s defects.

Q: Is it hard to install?
A: It is very easy to install, but must be installed by an adult. You can watch the easy to follow Crack Sticker Installation video.

Q: Can you change the packaging for fund raising etc?
A: Yes, there is a minimum order required, please send details in an email to contactus@3dlightfx.com

Q: Is there a discount available if I order a large amount?
A: Yes, please contact customer service at contactus@3dlightfx.com with your request.

Q: Do the lights require special batteries?
A: The lights require either 3-AA or 3-AAA batteries depending on which light you have purchased. You will find detailed information in regards to required batteries on the outside of the packaging. Please make sure the batteries are installed and replaced by an adult. For best results be sure to use brand new batteries.

Q: Can I use rechargeable batteries?
A: Yes, but we have found that rechargeable batteries tend to fade faster than the standard batteries, thus effecting the brightness of your night light.

Q: Will it get too hot if I leave it on for a long period of time?
A: No the light will never become hot to the touch.

Q: Will I have to change the light bulbs?
A: No, we have used high quality LED lights rated to last an astonishing 40,000 hours.

Q: What safety concerns should I pay particular attention to?
A: Install the night light in a location that is out of a child’s reach, making sure that the batteries are installed and replaced by an adult.